IKEA SKADIS Bin Set S/M/L – with Label Field
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage bins in three sizes (S/M/L) for the IKEA SKÅDIS pegboard, with framed label field.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Storage bins in three sizes for IKEA SKADIS pegboards, with a label field on the front.
Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.
Features
Sizes S, M and L
Label field on the front
For screws, cable ties and small parts
Mounting
Two Universal Pegs are already on the print plate, no extra download needed. Hang the holder with the 2 pegs, spread the side arms slightly and click it in. Separate pegs print in their strongest orientation, so the hooks don't snap off.
More for your SKADIS board
SKADIS Tilt Bin – flips open, closes by itself
SKADIS Shelf Set – 88, 168 and 248 mm wide
SKADIS Glue Stick Dispenser – gravity-fed, for 7 and 11 mm sticks
SKADIS Phone & Tablet Shelf – phone or tablet with cable slot
SKADIS Screwdriver Holder – 10 slots, 6.5 and 10 mm
See all of them in my collection: Skadis hardware
If you print it, I'd love to see a photo in the comments or as a Make!