IKEA SKADIS Battery Dispenser – AA + AAA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gravity-fed battery dispenser for AA and AAA batteries for the IKEA SKÅDIS pegboard.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Take a battery from the tray and the next one rolls forward automatically. A gravity-fed battery dispenser for IKEA SKADIS pegboards.
Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.
Features
Load from the top, a curved ramp rolls the lowest battery into the tray
AA version: about 8 batteries
AAA version: about 10 batteries
Mounting
Two Universal Pegs are already on the print plate, no extra download needed. Hang the holder with the 2 pegs, spread the side arms slightly and click it in. Separate pegs print in their strongest orientation, so the hooks don't snap off.
More for your SKADIS board
SKADIS Glue Stick Dispenser – gravity-fed, for 7 and 11 mm sticks
SKADIS Bin Set S/M/L – three sizes with label field
SKADIS Cable Comb + Cable Hook – 7 slots plus hook for coiled cables
SKADIS Tilt Bin – flips open, closes by itself
SKADIS Phone & Tablet Shelf – phone or tablet with cable slot
See all of them in my collection: Skadis hardware
If you print it, I'd love to see a photo in the comments or as a Make!