1 / 12
Replacement Water Tank for Xiaomi Mijia Electric Flusher MEO701 (Resin) — zdjęcie 1
1 / 12

Replacement Water Tank for Xiaomi Mijia Electric Flusher MEO701 (Resin)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Resin-printed replacement tank for the Xiaomi Mijia MEO701 oral irrigator, with a test piece for shrinkage calibration.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

The original water tank of my Xiaomi Mijia Electric Flusher MEO701 broke, so I designed a replacement. The model follows the original tank: it docks and latches onto the irrigator body the same way, and the filling hole is closed with a flip-up lid.

The tank is designed for resin (SLA/MSLA/DLP) printers. I printed it in Anycubic Water-Wash ABS-Like Resin 3.0, Clear.

⚠ IMPORTANT: compensate for your resin's shrinkage!

The docking interface needs to be accurate, and every resin shrinks differently. So:

  1. Print the test piece first (MEO701_test_fit.stl). It's just the top docking interface — only 11 mm tall and about 6 ml of resin.

  2. Try it on the irrigator body. It should slide on and lock without play and without force.

  3. If it doesn't fit, scale the model up in your slicer by your resin's shrinkage and print the test piece again.

  4. Only once the test piece fits, print the full tank at the same scale.

With my resin the shrinkage was 2%, so I printed at 102% scale.

Files

  • MEO701_test_fit.stl — test piece (docking interface only)

  • MEO701_tank.stl — tank

  • MEO701_lid.stl — flip-up filler lid

  • MEO701_tank_with_lid_assembly.stl — tank and lid assembled

Resin usage (without supports)

Tank ≈ 49 ml, lid ≈ 1.5 ml, test piece ≈ 6 ml.

Post-processing

Wash the parts thoroughly and cure them completely. The tank holds water that ends up in your mouth, so no uncured resin must be left on it.

Tagi