Replacement Water Tank for Xiaomi Mijia Electric Flusher MEO701 (Resin)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Resin-printed replacement tank for the Xiaomi Mijia MEO701 oral irrigator, with a test piece for shrinkage calibration.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
The original water tank of my Xiaomi Mijia Electric Flusher MEO701 broke, so I designed a replacement. The model follows the original tank: it docks and latches onto the irrigator body the same way, and the filling hole is closed with a flip-up lid.
The tank is designed for resin (SLA/MSLA/DLP) printers. I printed it in Anycubic Water-Wash ABS-Like Resin 3.0, Clear.
⚠ IMPORTANT: compensate for your resin's shrinkage!
The docking interface needs to be accurate, and every resin shrinks differently. So:
Print the test piece first (
MEO701_test_fit.stl). It's just the top docking interface — only 11 mm tall and about 6 ml of resin.Try it on the irrigator body. It should slide on and lock without play and without force.
If it doesn't fit, scale the model up in your slicer by your resin's shrinkage and print the test piece again.
Only once the test piece fits, print the full tank at the same scale.
With my resin the shrinkage was 2%, so I printed at 102% scale.
Files
MEO701_test_fit.stl— test piece (docking interface only)MEO701_tank.stl— tankMEO701_lid.stl— flip-up filler lidMEO701_tank_with_lid_assembly.stl— tank and lid assembled
Resin usage (without supports)
Tank ≈ 49 ml, lid ≈ 1.5 ml, test piece ≈ 6 ml.
Post-processing
Wash the parts thoroughly and cure them completely. The tank holds water that ends up in your mouth, so no uncured resin must be left on it.
