Wall Mount for a 19" 1U Network Switch (44-45 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets to hang a 19-inch 1U switch on the wall without a rack. 4 per device, plus a compact version.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Brackets for mounting a 19-inch switch or any other 1U device (44–45 mm tall) on a wall, without a rack or shelf. You fix the brackets to the wall first, then slide the switch into them.
One device needs 4 brackets: one on each side and two underneath.
Files
SwitchMount_1U_44mm.stl— main bracket, 56 × 80 × 15 mm. Screws to the wall. The holes in the arms let a screwdriver reach the wall screws.SwitchMount_1U_45mm_Compact.stl— compact version, 55 × 35 × 10 mm, for tight spots where the main bracket doesn't fit.
Installation
Hold the device against the wall and mark the bracket positions: one on each side and two underneath.
Screw the brackets to the wall, reaching the screws with a screwdriver through the holes in the arms.
Slide the switch into the installed brackets.
Material: PETG.