Sprawled Fidget Panda
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place fidget panda made of linked segments and splayed black legs, set up for AMS colour or a single filament.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Standard Digital File License
This fidget panda comes off the printer in a single piece, stretched flat on its front with four black legs splayed out and a body of linked white segments behind its big round head. In the AMS profile, the colour changes pick out black rounded ears, black eye patches, black eyes with a white crescent highlight, with a little black nose above a gently smiling muzzle. Prefer to run just one filament? There's a single colour profile included too. Keep it by the keyboard for a bit of fiddling during long calls, or give it to a grown up mate who adores pandas.
There are no supports to worry about, and because it prints in place there's no assembly either, so it's a friendly pick if you're new to this kind of model. Give the build plate a wipe before you start, as a clean plate helps small parts like the feet grip the first layers. Printing two or three in one go gives you a little panda crowd, just like the photos. Swap the white for another pale filament if you fancy a different look.
Filament Colour & Material
PLA works well here. White and black give you the look shown in the photos, and for the single colour profile any one colour you like will do.
Print Settings
Print in Place
No Supports
Wall line count: 2 or more
Infill: 15%
0.4mm Nozzle
Layer Height 0.12
This print uses 0.6mm line widths as the default, initial, and outer walls.
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: