LayersFactory
Zgłoś model
1 / 6
VARO Digital Multimeter Holder for IKEA SKADIS — zdjęcie 1
1 / 6

VARO Digital Multimeter Holder for IKEA SKADIS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Anony

@Anony_152475

A three-hook IKEA SKADIS holder for the VARO VAR10076/26 digital multimeter, including a fit test.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (1)Powiązane

VARO Multimeter Holder for IKEA SKÅDIS

Give your VARO VAR10076/26 digital multimeter a dedicated place on your IKEA SKÅDIS pegboard. This holder is a remix of the original design by Josselin Hefti, adapted with three SKÅDIS hooks.

The original multimeter cradle and probe holder are retained. The two original screw holes have been closed.

Features

  • Three SKÅDIS hooks: two at the top and one centered below on the staggered row

  • Integrated probe holder from the original design

  • Separate fit test to check the hooks before printing the full holder

  • STL, Bambu Studio 3MF and editable STEP files included

Fit and installation

The upper hooks are 40 mm apart. The third hook is centered 20 mm lower. The hooks are designed for a SKÅDIS board approximately 5 mm thick, with 5 × 15 mm slots.

  1. Make sure there is at least 2.5 mm of space behind the pegboard.

  2. Raise the holder and insert all three hooks into the slots.

  3. Slide the holder down so the hooks engage behind the board.

Print settings

Suggested starting settings:

  • Material: PLA

  • Layer height: 0.2 mm

  • Walls: at least 3

  • Scale: 100%

  • Supports: as needed under the hooks; check your slicer preview

Consider placing the holder on its flat right side so the hook profiles lie in the layer plane. Check bed adhesion and support placement in your slicer.

Files

  • varo_skadis_v4.stl – the complete holder

  • varo_skadis_v4.3mf – Bambu Studio project

  • varo_skadis_v4.step – editable CAD solid without feature history

Credits

This is a remix of multimetre VARO holder by Josselin Hefti.

The SKÅDIS Mount Collection by Printuin was consulted for inspiration; its models are not included in this file.

Tagi

organizerikeaholderelectronicspegboardmultimetertoolholderskadisvaro