BarberPRO Killer-LI Beard Trimmer Guards - 0.4, 0.6, 0.8 & 1 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Short-stubble combs in four lengths, printed in PLA and tested on BarberPRO Killer-LI. Remix of 4/5 mm guards.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Four short-stubble comb guards for the BarberPRO Killer-LI trimmer shown in the photos. I modified the original model to provide shorter options than the 2 mm black comb supplied with my machine.
Included sizes: 0.4, 0.6, 0.8 and 1 mm. These values describe the intended remaining hair length.
Fit and printing
Printed in PLA and tested successfully on my pictured BarberPRO Killer-LI. Compatibility with other trimmers has not been verified. The supplied HairNizan.3mf contains the modified models; review its embedded slicer settings for your printer before printing.
Photos
The light-colored combs on the print bed are my four printed versions. The black comb marked 2 mm is the original accessory supplied with my machine. The other photos show the trimmer used for the fit test.
Remix credit
Based on “Hair clipper combs - razor no. 4 - 5” by ljhtom (Javier Hernando).
Original model: https://makerworld.com/en/models/2466438-hair-clipper-combs-razor-no-4-5
I changed the original 4 mm and 5 mm design to the four shorter lengths listed above.
License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).