1 / 3
Multi-Catch Mouse Trap Improvements — zdjęcie 1
1 / 3

Multi-Catch Mouse Trap Improvements

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Anti-escape improvements for the multi-catch mouse trap

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I noticed that the mouse could escape from the trap. Therefore, I made some improvements by modifying the inner door and designing a protective cover for the outer door.

The inner door has been slightly enlarged to close the gaps between the door and the housing as much as possible. Additionally, the lower edge of the door has been bevelled to reduce the contact area available for the mouse to grip with its paws and teeth.

The second part I designed is a cover for the top of the outer door when it is in the closed position. This should prevent the mouse from pulling the outer door down. The cover must be glued to the housing.

Important Note:

The models are scaled to 120% of the original design. If you printed your mouse trap at the original size, you will need to scale these parts down to 83.33% of their current size to achieve the correct dimensions.

Tagi