GableNest - Detailed Nativity Stable | Timber & Stone, 5 Pieces

A compact, paintable stable with sculpted timber grain, knots, worn plank edges, braced posts, overlapping roof boards and a stone-edged floor. The rear star is open through the wall. Paint the wood, earth and stones to match your nativity.

R02 - size and parts

Assembled: 165 x 125 x 130.6 mm at 100%. Every individual model fits a 180 x 180 x 180 mm build volume in the supplied orientation. Allow room for the brim and check your slicer's usable bed area.

Print 1 base, 1 rear wall, 1 front portal and 2 identical roof panels. Four unique structural models make five assembled pieces. Two small fit coupons are included separately. The roof-pair 3MF already contains both roof panels.

Files and revisions

The R02 release includes six STL files, five geometry-only 3MF files, an editable source ZIP and an illustrated English/Italian print, assembly and paint guide. Find the geometry in R02 - Detailed kit, and the source ZIP, R02 README and R02 guide in Other files. Units are millimetres. The 3MF files contain geometry and placement without a printer profile or G-code. R01 is retained separately for reference; use all structural parts and instructions from the same revision.

Printing and assembly

Keep the supplied R02 roof orientation: each roof stands on its end, 122 mm tall. Use an appropriate brim and supports for your own settings. Remove support material from the roof sockets and rear star before assembling. Test the fit coupons at the same scale, allow the parts to cool, then dry-fit the full kit. Decide whether to glue only after checking alignment. Keep paint buildup away from mating faces.

If resizing, apply the same percentage to every part and coupon. Smaller scales also reduce clearances and surface details.

Digital review and physical status

This revision has not yet been physically printed or assembled. Adhesion, support removal, physical fit, strength and stability still need a real trial. Four offline jobs reviewed all five structural pieces. A generic PLA study with a 0.4 mm nozzle, 0.16 mm layers, three perimeters, 15% infill and automatic supports estimated about 241 g and 26 hours. Re-slice for your machine and material. Fine secondary grain may soften or disappear at the chosen resolution.

Gallery images are digital renders of the supplied models; colours are painting suggestions. Figurines are separate models and are not included in this kit. The previous R01 gallery views are retained after the new R02 views.

Italiano

Capanna da presepe da dipingere con venature e nodi scolpiti, travi controventate, assi sovrapposte e pavimento con pietre perimetrali. Dimensioni montata: 165 x 125 x 130,6 mm. Cinque pezzi: base, fondo, portale e due falde uguali. I singoli modelli rientrano in 180 x 180 x 180 mm nell'orientamento fornito.

Usare R02 - Detailed kit per le geometrie, inclusi i due provini. Sorgenti ZIP, README R02 e guida illustrata R02 sono in Altri file. R01 conservata separatamente come riferimento; usare parti e istruzioni della stessa revisione. Le falde R02 si stampano sul bordo, alte 122 mm. Pulire i supporti nelle sedi e nella stella, provare a secco e poi dipingere. Modello verificato digitalmente, ancora da stampare e provare fisicamente. Ricalcolare nel proprio slicer; eventuale scala uguale per tutti i pezzi.

Original design MARGRAF ITALY. Creative Commons Attribution 4.0 International.