1 / 1
One-part sunshade for the DJI Mini 5 Pro RC-2 controller — zdjęcie 1

One-part sunshade for the DJI Mini 5 Pro RC-2 controller

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a one-part, thin-shell (1.2 mm) sunshade for the DJI Mini 5 (maybe also 4) Pro RC-2 remote controller.

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
40
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Most/all sunshade parts for the DJI RC-2 and similar controllers for the Mini 5 (4?) Pro drones are multipart, hinged, flat-wall parts.

In contrast, this is a single, non-collapsible thin-shell (1.2 mm) part that the controller is slid in all the way to the back. The two slits in the back wall let the installed joysticks to pass through, and the two rounded openings on top of them allow for a free thumb movement while operating the joysticks. 

I printed this part using Onyx (CCF-filled nylon) on a Markforged Mark Two printer. YMMV depending on the material (it should be a bit elastic, such as PETG or nylon) and the printer used; the 1.2 mm thick shell in Onyx was found to be the weight-surface quality optimum.)

Tagi