One-part sunshade for the DJI Mini 5 Pro RC-2 controller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a one-part, thin-shell (1.2 mm) sunshade for the DJI Mini 5 (maybe also 4) Pro RC-2 remote controller.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Most/all sunshade parts for the DJI RC-2 and similar controllers for the Mini 5 (4?) Pro drones are multipart, hinged, flat-wall parts.
In contrast, this is a single, non-collapsible thin-shell (1.2 mm) part that the controller is slid in all the way to the back. The two slits in the back wall let the installed joysticks to pass through, and the two rounded openings on top of them allow for a free thumb movement while operating the joysticks.
I printed this part using Onyx (CCF-filled nylon) on a Markforged Mark Two printer. YMMV depending on the material (it should be a bit elastic, such as PETG or nylon) and the printer used; the 1.2 mm thick shell in Onyx was found to be the weight-surface quality optimum.)
