Fidget Spinner : AI CAD Scripting Test.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fidget Spinner : AI CAD Scripting Test.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
ART DECO THREE-ARM FIDGET SPINNER
A classic three-arm fidget spinner with rounded edges, concentric
stepped grooves, and sunburst detailing on both faces. Designed for
one standard-size 608 bearing with two matching printed center caps.
WHAT TO PRINT
- 1 x spinner_body.stl
- 2 x center_cap.stl
- bearing_fit_coupon.stl first, to test your printer and bearing fit.
HARDWARE REQUIRED
- 1 x 608 ball bearing: nominal 22 mm OD x 8 mm ID x 7 mm width.
No separate fasteners or added weights are specified.
PRINTING AND FIT
Designed for FDM using a provisional 0.4 mm nozzle assumption.
Face grooves and radial details are approximately 0.8-0.9 mm wide.
Check your slicer preview to ensure the details survive slicing;
extrusion width, first-layer squish, and material affect the result.
Printer, filament, and final print settings are not prescribed.
The fit coupon has three test holes, left to right:
21.8 mm, 22.0 mm, and 22.2 mm.
The initial body bearing seat is nominally 21.95 mm.
If needed, adjust body_seat_diameter_mm in specs/params.json
and rebuild before printing the final body.
The arranged 3MF contains the body, two caps, and fit coupon.
Its generic 250 x 220 mm plate is not a printer-specific profile.
Do not print the assembled or exploded preview STLs.
ASSEMBLY
1. Test the coupon with your actual bearing.
2. Print the body and two caps. Clean stringing from mating features.
3. Seat the bearing in the body, applying pressure to the outer race.
4. Insert one split center-cap peg from each face into the inner-race
bore. Retention uses the split pegs' grip, not a retaining shoulder.
5. Hold the caps and check that the body rotates freely without rubbing.
Stop if fitting the bearing or caps causes binding or cracking.
PROTOTYPE STATUS
Digital mesh and sampled clearance checks have been performed.
Physical bearing fit, cap retention, durability, and print quality
have not been verified. Print and test before treating it as finished.
Small parts and bearings are not suitable for young children.