Universal Adjustable Support Pillars / Anti-Sag Jack 30-130mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of highly versatile, screw-adjustable support pillars designed to eliminate GPU sag, brace monitors
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a set of highly versatile, screw-adjustable support pillars designed to eliminate GPU sag, brace monitors, or support any other desk setup equipment. The model utilizes a sturdy threaded mechanism that allows for precise height adjustments to perfectly fit your space.
The kit includes 4 different sizes to cover a wide range of clearances:
Extra Short: 30mm – 40mm
Short: 45mm – 75mm
Medium: 55mm – 90mm
Long: 75mm – 130mm
🛠 Print Settings & Assembly
Material: PLA or PETG recommended for heavy graphic cards or warm PC cases
Infill: 15% Gyroid infill for extra compressive strength
Walls/Perimeters: 4 walls to ensure the threads are strong and durable.
Supports: No supports needed! The model is designed to print cleanly directly on the bed.
Assembly: Simply print the base pillar and the threaded rod, screw them together, and adjust to your desired height. The built-in locking ring helps secure the height in place.