Magnetic Case for SML over Matter/Thread IR Meter Reader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic case for the SML over Matter/Thread IR meter reader. Versions for four 6×3 mm or 8×3 mm magnets.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A 3D-printable case for mounting the SML over Matter/Thread infrared reader onto your electricity meter. Four neodymium magnets hold the reader in place over the meter’s optical interface.
The reader uses an ESP32-C6 to read SML data via infrared and send electricity readings to Home Assistant over Matter/Thread.
Two case versions are available:
6 × 3 mm magnets: requires four round neodymium magnets, 6 mm diameter × 3 mm thick.
8 × 3 mm magnets: requires four round neodymium magnets, 8 mm diameter × 3 mm thick.
Choose the model that matches your magnets. Check the case dimensions and optical interface position against your meter before printing.
Firmware, hardware information, and setup instructions are available on GitHub — SML over Matter/Thread.
If you print one, I’d love to see your make! Please share which electricity meter you’re using it with.