Magnetic Case for SML over Matter/Thread IR Meter Reader
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic case for the SML over Matter/Thread IR meter reader. Versions for four 6×3 mm or 8×3 mm magnets.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
A 3D-printable case for mounting the SML over Matter/Thread infrared reader onto your electricity meter. Four neodymium magnets hold the reader in place over the meter’s optical interface.
The reader uses an ESP32-C6 to read SML data via infrared and send electricity readings to Home Assistant over Matter/Thread.
Two case versions are available:
6 × 3 mm magnets: requires four round neodymium magnets, 6 mm diameter × 3 mm thick.
8 × 3 mm magnets: requires four round neodymium magnets, 8 mm diameter × 3 mm thick.
Choose the model that matches your magnets. Check the case dimensions and optical interface position against your meter before printing.
Firmware, hardware information, and setup instructions are available on GitHub — SML over Matter/Thread.
If you print one, I’d love to see your make! Please share which electricity meter you’re using it with.