1 / 2
Sigfinn ikea laptop stand cable retainer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple print to hold cables after unplugging them from laptop on ikea sigfinn laptop stand.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Simple print to hold cables after unplugging them from laptop on ikea sigfinn laptop stand.
Took about 2 hours to print on an Ender3 v2 with 15% infill.
I used a small dot of paint on supports about half way up the model because it leans over quite a lot, but I don't think it is necessary if you have good bed adhesion.