Cisco CP-3905 Phone Stand (Replacement)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement foot stand for the Cisco CP-3905 IP phone. Snaps into the underside, tilts the phone up and needs no hardwar
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Broken or missing foot stand on your Cisco CP-3905? Don't throw the phone away, print a new one.
Without the stand the phone lies flat on the desk, with the display at a bad angle and the buttons harder to reach. This replacement tilts it back up. It goes into the recess on the underside, and two small clips snap perfectly into the holes in the side walls, so it stays put instead of sliding around. The cable still passes beside the stand, and the ribbed underside keeps it light but stiff.
It's a single part, and it only needs supports on the two clips.
Made for the Cisco CP-3905. Not tested on other Cisco models.