X-Shot Pro Micro Barrel Retention
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Barrel upgrade for the X-Shot Skins Pro-Series Performance Micro mag-fed spring-powered blaster. Allows Better BCARs.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The X-Shot Pro Micro Barrel Retentiont is a 3D-printed muzzle upgrade for the X-Shot Skins Pro-Series Performance Micro mag-fed spring-powered blaster. Featuring a two O-rings for an extra-tight friction-fit barrel clamp, this mod part allows the use of longer barrels and better rifling compatibility. Additionally, the replacement front end installs easily. For safety and compliance, these parts should always be printed in Orange filament.
FEATURES:
• X-Shot Pro Micro Barrel Retention
• 3D-printed muzzle upgrade
• Install premium metal barrels
• Broader rifling compatibility
• Easy to install!
• Designed for the X-Shot Pro Micro
• Compatible with barrels 90mm (~3.5in) or longer
PERFORMANCE:
Average FPS (Standard Deviation) with the original 1.75 x 80mm spring
• 130 (3) FPS with the ~12.7 x 75mm original plastic barrel
• 125 (5) FPS with the 13 x 100mm Aluminum Barrel
*More testing coming soon!
FILES INCLUDED:
• 2 Replacement Barrel Retention Muzzles
HARDWARE NEEDED:
• 2 DASH-016 O-rings
And ONE of either
• 1 13 x 100mm Alumimum Barrel
• 1 0.527 x 3.94in Aluminum Barrel
• 1 0.495 x 4.75in Aluminum Barrel (untested)
RECOMMENDED PRINT SETTINGS:
• Quality: No scarf seams or joints
• Strength: 4-5 wall loops