66 modeli
I didn't like the factory tool holding clip, so I designed this small wrench holder to fit on the lower front. It mount to both sides with the back mount fitted, but only the opposite side with Front Mount due to limited clearance. To…
Wydruk około 2,87 €–3,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
SplineXL tubes are notoriously loose in bearings due to the rounded crown of the tube. This provides little surface area to ride on the bearing. MAXSpline is slightly better, but can use some help on occasion. These tubes are 1 way…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A comfort grip (for when the device is opened/in play) and a standing case (for when the clamshell is closed) for the iconic Anbernic RG35XX SP. It has access to all the ports on the side and bottom of the device. It can be printed with…
The Anbernic RG35XXSP is a retro handheld emulation game console that runs on Linux. It's design is boxy and this is for people who want a little bit more grip to the console, but still keep the slim and portable nature of the console. I…
A simple stand for the Anbernic SP
There are two files, a version that is .8mm thick and a version that is .6mm thick. The .8mm version is almost silent, but the buttons are a little stiff. The .6mm version has a soft audible click, but the buttons feel a bit better to…
DISCLAIMER: Modding your electronic devices can be dangerous, and you may end up damaging them. Use at your own risk. The author of this publication is not responsible for any damage caused as a result of using these models. Protection…
Charging dock for the RG35XXSP. Made a bunch of these for the kids in my life this year. Print the front and back in PLA or PETG, and the feet in TPU. Assembles with QTY m4 screws for the feet and snap-together front and back halves that…
Support to nicely manage your Maxspect Biosphere in your sump Category: Tool Holders & Boxes
When my daughter asks to take her for a ride on an electric scooter, she was not quite comfortable and she could fall from any maneuver. therefore, I designed additional handles that turned out to be quite strong and now she is happy to…
Support to nicely manage your maxspect biospheres in your sump Category: Tool Holders & Boxes
Rework off Tomunderwood's Gameboy Advance SP Rugged Case to suit the Anbernic RG35XXSP
A stand that is about 60mm tall and goes into chamber 1, it holds 10 BioSpheres made by Maxspect, specifically the Nano-Tech BioSpheres. The central shaft is for being able to pull it out when needed. I use this in conjunction with a…
I found that both the 0.8mm and 0.6mm variants of @8BitDrip_2287972 's RG35XXSP Membrane Inserts were too thick, so I used Blender to make an even thinner 0.4mm variant. I find this thinner variant works very well in my RG35XXSP and feels…
If you like to cook, you probably use spices. Whether you're a professional or an amateur in the kitchen, you use spices to make your food very tasty. Maybe you only have 10 spices, but you can also have 20. It does not matter because…
-------------------10/07/24------------- IT HAS BEEN DONE! I figured out the sticking and I think I make it a little better than the first round with the L2/R2 buttons. Check out the V2 of those and let me know if you see anything that…
A simple hand grip for Anbernic RG34XXSP. Add some foam pad for perfect fit. Inspired by https://www.printables.com/model/51459-geta-grip . Category: Toy & Game Accessories
Controller mount that is suitable for use with all of the following: Gyre 200 series Gyre 300 series Turbine Duo Aeraqua skimmer controller ICV6 wireless hub Printed with PLA+, supports required for the little nib at the top.
Designed after the work of IamDroBro (and mb also Emotional-Priority49) on Reddit for the RG35xxsp. Hardware required: 4x M3x8-12mm countersunk bolts 4x 4.5mm(w) x 5mm(d) M3 threaded heat inserts 4x 5-8mm x 2mm rubber pad feet/bumpers 1x…
A little desk holder for an Anbernic rg35xxsp. Print in place.
Designed after the work of IamDroBro (and mb also Emotional-Priority49) on Reddit for the RG35xxsp. This dock suits the RG35xxsp - check your model no. Hardware required: 4x M3x8-12mm countersunk bolts 4x 4.5mm(w) x 5mm(d) M3 threaded…
ZXSpectrum “rubber” case for cherry keyboard. Compatible with original motherboard and Harlequin clones. Splitted in 3 parts for convenience. Logo included for printing on different colors.
Nothing special but displays the SP in your collection.
For the Anbernic RG34XXSP (not sure if it works with any others), slim triggers so they don't stick out so much. Also made 2 heights of buttons. Regular buttons are the same height as the originals. “Flush” buttons sit flush with the…
The model was based on https://www.printables.com/model/1152772-honeycomb-storage-wall-anbernic-rg35xxsp-mount. Thanks to the author @SamuraiLink3. Print settings Support: Yes Filaments: PLA, PETG Fill: 15-20%. Perimeters: 3
Printed without support. Holds the skimmer controller very nicely. I have it screwed to some plywood. I forget the size screw that I used, but it was some normal size flat head screw from the hardware store. Probably #8 if I had to guess.
Included are models of the 3 printed parts in the assembly. The purchased parts (not including desiccant beads) are as follows: Humidity sensor: https://www.amazon.com/dp/B07GNMKYCZ?psc=1&ref=ppx_pop_dt_b_product_details Screw Handle…
I modeled out a 3D-Printable insert for the Anbernic RG35XXSP based on the dimensions circulated online. A combination of Multi-Material Printing and patterned build plate allowed me to produce a pretty nice design to put in my handheld.…
Printer : Modified Ender 3 V2 with Direct Drive Material : ESun PETG Black Nozzle : 0.4mm Layer Height : 0.2 Wall Count : 2 Infill Pattern : Gyroid Infill : 40% I wanted to get a compact case that protect much of the body from scratches,…
Light shade for the Maxspect Etherial E8 aquarium LED Light Due to the large size, you will need a printer with a sizable print bed. Alternatively, you can use your slicer or the STEP file to print the shade in multiple, smaller pieces. I…
This is a custom-designed mount for the Anbernic RG35XXSP handheld console, specifically made to fit the IKEA Skadis pegboard system. It’s the perfect way to display your device and keep it safe when you aren't playing. Features: Perfect…
We bought a used FabiMax cot, but it was missing the part where the belt is attached to the cot, so I designed a new one. Instead of the original flat head screw, this uses a M6x45 or M6x50 countersunk screw. I printed it in ABS. PLA…
Second version of my Sandbox Spade - it looks better - it is stronger - can be printed without supports (original version with good cooling only and 'nosupp' version on every printer) - chamferred ('sharp') front edge - added canals where…
A magnetically-locking hip-mounted belt holder for the Anbernic RG35XXSP retro handheld. It uses a single paper clip for the top cover hinge and magnets on the side to keep the lid in place. There are two options for the type of magnets…
This is a Honeycomb Storage Wall mount for the Anbernic RG35XXSP. There's not much to say about this one, its a simple box that can attach to HSW inserts and holds your handheld securely. Print Settings Support: None Filament: (almost)…
SD card holder for the Anbernic RG35XXSP. Replaces the existing battery cover. VERSION 2.0
Maxspect Gyre XF130/230 and 150/250 - inner drive bushing Printed from PET-G 0.6 - nozzle
RG35XX SP Battery Cover replacement using original dimensions and fits snugly.
I could not find an RG34XXSP Dock I liked, the only one I even found required screws and I didn't like that. This one is pretty simple. All you need to print is one base, the plug is optional. Technically, the mini HDMI angle adapter is…
Wire guard for running wire through VEX MAXSpline Extrusion
This part replaces the original bottom feet with a taller version to increase ground clearance. I needed this so my robot vacuum could get under the bed without getting stuck. I printed this on a Bambu Lab X1C using eSUN PLA+. Recommended…
I made a comfort grip for the Anbernic RG35XXSP, as it needs a bit more size for bigger hands. Printed in PETG at 0.2 mm, with support's
Wire guard with a hole cut in the center for running wire through the center of the VEX MAXSpline extrusion
Endcap for the VEX MAXSpline tube, that centers hexshaft for encoder use
Some minimalist grips for the Anbernic SP (RG35XXSP). Gives your ring finger and pinky something to hold on to, without adding much size to the profile of the console. Still very pocketable. Should be just a friction-fit with the screw…
I'm not sure what model this block is since I couldn't find it anywhere on the website. The block(with the stock bracket removed) is somewhere around 50x50mm. Should fit snugly. Print with relatively high infill and 4 shells minimum. Take…
Generated a 3x1 solid bin using https://gridfinity.perplexinglabs.com/ then made it fit the RG34XXSP. Cut the left side so it's only using as much as needed. Added logos and names but blank provided as well.
this LED holder is build for 6mm thick glas
See new model below that solves the issue of the slot wearing out over time allowing SD Cards to fall out. Improved updated version: https://www.printables.com/model/1194804-anbernic-rg35xxsp-sd-card-holder-rev20
This is a very simple shell made to hold ryandam's Teensy 4.1 Sleeve Case on the back of the RG35XXSP lid and allow rotation of the Teensy while opening/closing.This is significant when using a short 6" cable like I am. Video…
this is an add-on for my Maxspect LED holder also for 6mm thick glas
Generated a 3x1 solid bin using https://gridfinity.perplexinglabs.com/ then made it fit the RG35XXSP. Cut the left side so it's only using as much as needed. Added logos and names but blank provided as well.
Hinter unserem Boxspringbett steht ein kleines Regal mit Netzteil und Ladekabeln. Trotzdem lag das Kabel jeden Abend wieder irgendwo aufm Boden und ich durfte suchen. Also hab ich mir diese Klammer gebaut. Die wird seitlich auf die Kante…
A replacement Battery Cover / Door for your Anbernic RG35XX SP that adds a Mechanism Mounting Point. Simply unscrew your old battery cover, and screw this one in. Yes, it's a bit silly, but it may come in handy ;)
A replacement Battery Cover / Door for your Anbernic RG35XX SP that safely holds an extra Micro SD Card out of the way of your fingers.
This is if you'd like to remove the thumbsticks on your RG34XXSP to make it more "SP-like". Short story long, I have the RG34XXSP in metallic blue (which is a bomb color). Anbernic recently released the RG-SP, but I found myself not…
This clips into a Tildagon (2026 version) to hold a hexpansion down against the soldered-on M2 nuts. Use this in conjunction with a couple of M2x8 bolts screwed in from the bottom of the Tildagon to secure the hexpansion against sliding…
Remix of the original charging dock by m00nd0gg. Removed original logo and added the Anbernic logo compatible with MMU.
A remix of an existing IKEA Skadis holder for the RG35XX SP that allows you to easily pull it out.
A replacement Battery Cover / Door for your Anbernic RG35XX SP that adds a Mechanism Mounting Point. Simply unscrew your old battery cover, and screw this one in. Yes, it's a bit silly, but it may come in handy ;)
I could not find an RG34XXSP Dock I liked, the only one I even found required screws and I didn't like that. This one is pretty simple. All you need to print is one base, the plug is optional. Technically, the mini HDMI angle adapter is…
This is a set of comfort grips for the Anbernic RG35XXSP. Fit to slide and lock onto the SP. Still allows for the lid to close, and access to all buttons and ports This purchase includes both a SOLID and AERATED version. The solid is a…
Recently I bought a 3D scanner. Scanning isn't as easy as I was hoping for. Getting all around an object for instance. I tried several things. I printed a manual turntable but that isn't working for me. Also hanging the object on a…
print and slide it on your gyre then you can mount your xf350 on the euro brace
