1 / 4
Hager electrical enclosure lid screw – single-start (1-start) replacement — zdjęcie 1
1 / 4

Hager electrical enclosure lid screw – single-start (1-start) replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement lid screw for Hager electrical enclosures / consumer units where the original screws have been lost.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
8
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Replacement lid screw for Hager electrical enclosures / consumer units where the original screws have been lost.

The problem this solves:
Hager produces two variants of this screw: a double-start (2-start) version and a single-start (1-start) version. Existing 3D-printable replacements on Printables and Thingiverse are all double-start. If your enclosure has a single-start thread in the lid socket, the double-start screw will not engage — which is exactly the situation this model was designed for.

Key dimensions (measured from original):

  • Head diameter: 13 mm

  • Thread core diameter: 6 mm

  • Thread outer diameter: 8.5 mm

  • Pitch: 2.65 mm

  • Thread starts: 1 (single-start)

Files included:

  • STL — ready to slice and print

  • SCAD — fully parametric source; adjust PITCH, TOLERANCE and BRIM_W as needed

Print settings:

  • Orientation: head down, flat on bed

  • Material: PETG or ABS recommended

  • Walls: 4+ perimeters

  • Infill: 50% minimum

  • Supports: none needed

  • Brim: included in model (can be disabled by setting BRIM_W = 0 in SCAD)

Tagi