Hager electrical enclosure lid screw – single-start (1-start) replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement lid screw for Hager electrical enclosures / consumer units where the original screws have been lost.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Replacement lid screw for Hager electrical enclosures / consumer units where the original screws have been lost.
The problem this solves:
Hager produces two variants of this screw: a double-start (2-start) version and a single-start (1-start) version. Existing 3D-printable replacements on Printables and Thingiverse are all double-start. If your enclosure has a single-start thread in the lid socket, the double-start screw will not engage — which is exactly the situation this model was designed for.
Key dimensions (measured from original):
Head diameter: 13 mm
Thread core diameter: 6 mm
Thread outer diameter: 8.5 mm
Pitch: 2.65 mm
Thread starts: 1 (single-start)
Files included:
STL — ready to slice and print
SCAD — fully parametric source; adjust PITCH, TOLERANCE and BRIM_W as needed
Print settings:
Orientation: head down, flat on bed
Material: PETG or ABS recommended
Walls: 4+ perimeters
Infill: 50% minimum
Supports: none needed
Brim: included in model (can be disabled by setting BRIM_W = 0 in SCAD)
