Autodarts mobile dart camera Setup V2 for KOTO Heavy Duty
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Website: www.groni3d.com / Questions? WhatsApp at +49 163 8036832 or private Message.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my custom-designed dart camera mobile setup with an integrated light ring. I printed the whole setup on a Bambu Lab A1 and Bambu Lab X2D.
User manual
Coming soon...
Contact
If anything doesn't fit or you have a problem, feel free to write a comment, send me a private message, or contact me via WhatsApp at +49 163 8036832 or E-Mail at [email protected] :)
If you enjoy the setup I would kindly ask you to upload a picture of your setup with a small feedback and rate the setup.
If you want the dart setup as a wall mount check this out:
If you want only the LIGHT RING without the cameras check this out. Its the same as this one:
Requirement / Dimensions / Components
Outer ring diameter: 745mm = 74,5cm
ca. 47h or 1d 23h print time (printed on Bambu Lab A1 and X2D)
1.370g filament
Printer bed size: 256x256 (length, width) tallest object: 190mm
Cylinder head screws:
12x DIN ISO 4762 M2x10
27x DIN ISO 4762 M4x16 or shorter
27x M4 OD6 Thread inserts
Print settings
Layer height: 0.2mm (or smaller if you want more detail)
Support: Feet / Light feet / Case / Ring light left & right
Support settings: Tree MANUAL (DONT CHANGE IT PLS)
Wall loops: min. 3
Infill: 7% to 10% with Grid or Gyroid (depends what you like more)
Seam position: aligned