Autodarts mobile dart camera Setup V2 for KOTO Heavy Duty
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Website: www.groni3d.com / Questions? WhatsApp at +49 163 8036832 or private Message.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is my custom-designed dart camera mobile setup with an integrated light ring. I printed the whole setup on a Bambu Lab A1 and Bambu Lab X2D.
User manual
Coming soon...
Contact
If anything doesn't fit or you have a problem, feel free to write a comment, send me a private message, or contact me via WhatsApp at +49 163 8036832 or E-Mail at [email protected] :)
If you enjoy the setup I would kindly ask you to upload a picture of your setup with a small feedback and rate the setup.
If you want the dart setup as a wall mount check this out:
If you want only the LIGHT RING without the cameras check this out. Its the same as this one:
Requirement / Dimensions / Components
Outer ring diameter: 745mm = 74,5cm
ca. 47h or 1d 23h print time (printed on Bambu Lab A1 and X2D)
1.370g filament
Printer bed size: 256x256 (length, width) tallest object: 190mm
Cylinder head screws:
12x DIN ISO 4762 M2x10
27x DIN ISO 4762 M4x16 or shorter
27x M4 OD6 Thread inserts
Print settings
Layer height: 0.2mm (or smaller if you want more detail)
Support: Feet / Light feet / Case / Ring light left & right
Support settings: Tree MANUAL (DONT CHANGE IT PLS)
Wall loops: min. 3
Infill: 7% to 10% with Grid or Gyroid (depends what you like more)
Seam position: aligned