1 / 2
Amps Mount for KTM 790 Adventure — zdjęcie 1
1 / 2

Amps Mount for KTM 790 Adventure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

6,04 € – 7,38 € netto (bez VAT)

Dla pliku: KTM AMPS Mount Sliced_0.4n_0.2mm_PETG_MK4IS_5h27m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 6,71 € netto (środek widełek).

Masa podana przez autora
118 g
Czas druku podany przez autora
5,45 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

An Amps compatible mount that will fit a KTM 790 Adventure (2019 Model). Mount your Tablet to your Bike!

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Amps compatible mount fitting a KTM 790 Adventure (2019 model).

I've designed this mount to go on my Adventure to mount my navigation tablet. In my case it's an Galaxy Tab Active 3 and I've used the Motoboxer tablet holder. I've designed this at an angle that I can still see the tablet when standing up, while making sure that the tablet does not overlap the HUD. If using a different tablet, this may not work in the same way. I've also used the 15 degree version of this windshield riser to get some more space behind the windshield.

I've ridden this setup on TET Kosovo for 2 1/2 Weeks and nothing broke off or something like that. So I feel pretty sure that this is sturdy enough, but use at your own risk.

Printing and Assembling

I've reinforced this print by adding 2 fully solid layers where layer intersects the mounting screws of the holder and the Amps at the same time. Check the sliced .3mf file for details.

You'll also need some threaded inserts and thread lock (at least I've used them). I've got mine from CNC Kitchen, so I'll link them for reference:

  • 2x M5 (use some Locktite 243 or something comparable on those, or they'll get lose)

  • 4x M4

Disclaimer

This is provided as is. I'm not responsible for anything you do with this. I'm not responsible if anything falls of your motorcycle, if this is not road legal in your country or if something breaks. Use at your own risk.

This was designed with a personal license of Fusion, so no commercial use of this model, but if you want to use the idea, your welcome to do so.

Tagi