Footswitch Enclosure For a Guitar Amp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an enclosure to build a replacement footswitch for switching effects or channels on a guitar or bass amp.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
This is an enclosure I designed for a footswitch for amps where the original is either lost or broken. The hole for the switch is 1/2" (12.7mm) diameter, and the hole for the jack is 3/8" (9.5,mm).
The enclosure is designed to use 3mm M3 threaded inserts and M3x8 screws. These can both be had in kits from Amazon. The threaded inserts are pressed in with a special bit for a soldering iron that comes with the kit.
Threaded inserts: https://www.amazon.com/dp/B0FH4JQ3VB
Screws: https://www.amazon.com/dp/B0FM3G5K6H
The original version I created was for the chorus effect on a bass amp I have. I printed it with the amp's branding, but removed it for this model.
The build here was printed with PCTG on a Bambu P2S. I printed added modifiers around all of the holes to print with 100% infill, but otherwise used the regular 0.2mm High Quality profile in Bambu Studio.
There are stl and 3mf files for the enclosure, the cover plate, and both together. A step file is also included for easy remixing and branding!