Open Thread Board Router - ESP32-C6 Super-mini USB C - case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case to make own thread board router for Thread and Matter, using only ESP32-C6 super mini.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
Turn Your ESP32-C6 Super Mini into a Thread Border Router
A simple, compact enclosure for the ESP32-C6 Super Mini, designed for DIY Thread Border Router projects and Matter smart home setups.
This case keeps your ESP32-C6 superprotected while providing dedicated openings for the USB-C connector and antenna. Its two-piece design uses a tight fit to hold the board securely in place without unnecessary bulk.
I tested this setup in a 55 m² apartment in an older Polish apartment building. Mounted approximately 2.2 m above the floor, near the center of the apartment, it provided good Thread coverage throughout the entire living space.
Features
Designed specifically for the ESP32-C6 Super Mini
Compact, minimalist two-piece enclosure
Dedicated USB-C and antenna openings
Tight fit to keep the board securely in place
Suitable for DIY Thread Border Route
Recommended Print Settings
Material: PETG recommended
Layer height: 0.2 mm
Supports: Not required
At least PETG is recommended because the ESP32-C6 can become warm during operation.
Important Notes
Compatibility: Designed exclusively for the ESP32-C6 Super Mini. Other ESP32-C6 boards may not fit.
Radio coverage: Actual Thread range depends on walls, interference, antenna orientation, and the surrounding environment.
A small enclosure for a useful DIY smart home project — simple to print, easy to assemble, and ready to become part of your Matter setup