Printer Feet /w Stressballs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of shock absorbing feet for 3D Printers built out of double-width 2020 extrusions
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A nice set of feet for 3D printers and other devices that are built out of 2020 extrusions.
They use a standard size stressball (+/-60mm diameter) and dampen vibrations from the printer.
The universal model goes on any double-width 2020 extrusion with M4 T-nuts and M4x10mm bolts. Button heads recommended, but capheads also work.
There is a second version specifically for the Ender3 V2. The rear of the frame holds the powersupply and this obstructs mounting of the feet. The E3V2 version is a foot that picks up on one of the powersupply screws and thus only needs one M4 T-nut and M4x10 bolt.
I would advise to print them with at least 1mm thick walls. Material isn't very important since it won't get hot and pressure is spread over a fairly large surface. PLA will work. Example photos use Devildesign Dark Violet PETG.