KEYS, COATS, HUNG RIGHT — Wall Hook Set (Key Rail + Hook Pair + Single Tab Hook)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three different wall hooks — not three sizes of one hook: a key rail, a hook pair and a single tab hook.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Three different wall hooks — not three sizes of one hook. (1) A 220 mm key rail with five evenly spaced hooks for keys, lanyards, badges and dog leashes; each hook is 12 mm wide and 6 mm thick with an upturned tip, so rings stay on. The rail mounts with two 7x7 mm square screw holes, one at each end (screws not included — use screws suited to your wall type). (2) A pair of general-purpose wall hooks for coats, bags, hats, towels and backpacks — print once, hang two. Each hook sits on a 50x50 mm mounting plate with two 7x7 mm square screw holes (screws not included), and the 16 mm wide, 6 mm thick fin with an upturned tip reaches about 51 mm out from the wall. (3) A single wall hook with side screw tabs: a 60x80 mm back plate with a tab on each side, each tab carrying a real 8x8 mm screw hole (screws not included), and an 18 mm wide, 6 mm thick fin with a 45-degree diagonal and upturned tip reaching about 52 mm out from the wall. Print in PLA at 0.2 mm layer height, 15-20% infill, NO supports, flat on the bed.