IKEA SKÅDIS screw bins - Any size sits flush
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bins for screws, plugs and small parts. It hangs solid, holds a lot, and the bins sit flush against each other
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Bins for screws and small parts, made to hang on IKEA SKÅDIS.
I wasn't really happy with the other alternatives for screws and similar things on here, so I decided to create my own.
On the photo, it's the 80mm one. It swallowed a ton of screws and it stays put and is very stable. The hooks sit on the real slot grid, with a second row lower down, so the bin doesn't swing or lean out.
Width is in 40 mm steps, same as the board. Put two next to each other and the sides meet. No gap, no wasted horizontal space.
A few different sizes uploaded.
Use organic supports for the hooks, as usual.