Z32 300ZX - Coil Pack Connector Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap and Fork guide that covers the 3 wires above the coil pack connectors on a Z32 300ZX
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to reproduce the black plastic cap that covers the coil pack connectors. This is more of a modeling and printing exercise for me to better my skills. I know that most people won't really use the black plastic pieces on top of the coil connector because it's annoying to remove.
I test fitted my models on the updated coil connector, which I purchased through Z1 Motorsports, in PLA and PETG. They all broke either during installation or during removal. The strongest orientation I found is printing the caps horizontally (where the skinny tabs are parallel to the print plate).
I don't have experience using stronger filaments like PET-CF or PPA-CF to see if the print is strong enough to withstand the forces against the rubber gasket pushing against the cap.
If you have stronger filament, give it a try and let me know!