Z32 300ZX - Coil Pack Connector Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cap and Fork guide that covers the 3 wires above the coil pack connectors on a Z32 300ZX
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 2
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to reproduce the black plastic cap that covers the coil pack connectors. This is more of a modeling and printing exercise for me to better my skills. I know that most people won't really use the black plastic pieces on top of the coil connector because it's annoying to remove.
I test fitted my models on the updated coil connector, which I purchased through Z1 Motorsports, in PLA and PETG. They all broke either during installation or during removal. The strongest orientation I found is printing the caps horizontally (where the skinny tabs are parallel to the print plate).
I don't have experience using stronger filaments like PET-CF or PPA-CF to see if the print is strong enough to withstand the forces against the rubber gasket pushing against the cap.
If you have stronger filament, give it a try and let me know!