1 / 8
BeanDock – Illy 250 g Can Adapter for De'Longhi Magnifica Evo — zdjęcie 1
1 / 8

BeanDock – Illy 250 g Can Adapter for De'Longhi Magnifica Evo

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Screw an Illy 250 g bean can on upside down and feed beans into your Magnifica Evo. Slide or rotary gate. PETG.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Screw an Illy 250 g bean can on upside down and let the beans feed straight into the grinder. A built-in gate seals the chute, so you can swap cans without spilling a single bean.

BeanDock replaces the hopper lid of the De'Longhi Magnifica Evo. The can sits inverted on top of the machine, the beans drop into the hopper by gravity as you brew, and when the can is empty you close the gate, unscrew it and put the next one on.

Choose your gate

Every set is the lid + one gate option. Both options use the same lid and the same Illy screw thread.

Option A — Slide gate (recommended first print)

A flat paddle slides through the socket: pull it out to open, push it in to close.

  • BeanDock_Lid.stl

  • BeanDock_A_SocketBase.stl

  • BeanDock_A_Funnel.stl

  • BeanDock_A_Slide.stl

The socket is split into two parts so that every part prints flat, with no bridges over the slide channel.

Option B — Rotary dial

A 120° lever turns a sealing disc on an off-centre pivot.

  • Click detents hold the lever firmly at OPEN and at CLOSED.

  • A window in the lever shows an engraved "OPEN" on the base only when the gate is open.

  • The funnel sits on a wide support shelf, so the can stands solid.

  • BeanDock_Lid.stl

  • BeanDock_B_RotaryBase.stl

  • BeanDock_B_RotaryDisc.stl

  • BeanDock_B_RotaryFunnel.stl

Compatibility

  • Machine: De'Longhi Magnifica Evo — tested on the ECAM290.61. Other Magnifica Evo models with the same hopper recess should fit; please check before printing the lid.

  • Can: Illy 250 g whole-bean can with the standard Illy screw lid.

  • Printer: the lid is about 211 × 177 mm, so you need a bed of at least 220 × 220 mm.

Print settings

  • Material: PETG (choose a food-contact filament if you want it in contact with beans)

  • Nozzle / layer: 0.4 mm / 0.2 mm

  • Walls / infill: 3 walls, 20–30 % gyroid

  • Filament: roughly 200 g for a full set

  • Tested on: Creality K2 Plus, textured PEI plate

  • Lid: top face down on the plate, no supports

  • A_SocketBase / B_RotaryBase: spigot on the plate, supports from build plate only (under the flange)

  • A_Funnel / B_RotaryFunnel: flat base down, mouth up, no supports — a brim helps

  • A_Slide / B_RotaryDisc: flat, no supports

All files are exported in their print orientation.

Assembly

Option A — Slide gate

  1. Lay the slide in the channel of the socket base.

  2. Put the funnel on top; the two pins line it up.

  3. Glue with a drop of gel super glue on the pins only — never on the slide.

Option B — Rotary dial

  1. Drop the disc onto the pivot pin of the base.

  2. Lower the funnel so both pins go into their bosses.

  3. Glue with gel super glue only inside the two bosses, on top of the support post and on the outer half of the shelf. Keep glue away from the disc so it stays free to turn.

  4. Turn the lever: you should feel a click at OPEN and at CLOSED.

Both options

  1. Fit the lid in place of the original hopper lid.

  2. Twist the socket assembly into the lid until the bayonet stops.

  3. Screw the inverted Illy can onto the thread.

  4. To change can: close the gate, unscrew, screw on the next one, open.

Credits

The Illy can thread is remixed from "Illy Can Connector" by mart_sch (Thingiverse, CC BY 4.0). Lid, socket, funnels, slide gate, rotary gate and the overall design are by 3DWARD.

"Illy", "De'Longhi" and "Magnifica Evo" are trademarks of their respective owners. BeanDock is an unofficial, compatible accessory and is not made, affiliated with or endorsed by illycaffè or De'Longhi. The names are used only to say what it fits.

Tagi