Screwdriver Holder – Parametric Pegboard Mount for Sy’s Peglock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric screwdriver holder for Sy’s Peglock pegboard system. Choose shaft and base diameters as well as wall in F360
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A screwdriver holder that integrates with Sy’s Peglock locking pegboard system (standard 1" pegboard). The handle rests in a ring and the shaft drops through a keyhole slot at the front, so you can lift a screwdriver out and drop it back in one-handed.
Fully parametric. The Fusion 360 file is included with full design history. Open Modify → Change Parameters and edit:
ShaftDiameter – hole for the shaft (set 1 mm bigger than your shaft). Default 7 mm.
HandleDiameter – inside of the ring (set 0.5 mm bigger than your handle). Default 25.5 mm. Works from about 20 to 29.5 mm.
RingWall – ring thickness. Default 3.2 mm.
Everything else updates automatically.
You also need: one Peglock board attachment clip from Sy’s Peglock. If your board isn’t quite standard, I recommend the Parametric Board Attachment template to size the clip to your board. The clip slides into the slot in the back of this holder.
Print settings: 4 perimeters and 0.2 mm or finer layers. 20% infill. Works well in PETg, or PET-CF, avoid PLA if load bearing as it will creep over time.
Part of a series: this is one of a growing set of Sy’s Peglock mounts for my workshop pegboard. Check out my profile for the other designs in the series, and follow me to see new ones as they’re added.
Credits: Built on Sy’s Peglock system. All credit for the clip design goes to Sy. Please give the original a like and a make.