1 / 5
DT700 / DT900 PRO X slider replacement Improved — zdjęcie 1
1 / 5

DT700 / DT900 PRO X slider replacement Improved

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement slider for the DT700 / DT900 PRO X and more Beyerdynamic headsets. It has been improved with added rigidity.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial

The slider on both sides of my Beyerdynamic DT900 PRO X broke a little while ago, so I decided to make a 3D scan of both. While I was doing this, I improved the design a bit to make it easier for a 3D printer to print and to make it generally stronger. I’ve been using my own replacement parts for a few weeks now, and I haven’t had any problems.

I advise using something stronger than PLA, as it lacks strength and degrades quickly. Consider using materials like PETG or other stronger alternatives. However, try to avoid materials that warp too much, like ABS. While ABS could be used, it would likely not fit very well.

I recommend printing it on its side, as shown in the picture above. Be prepared for a lot of support material it’s kind of difficult to remove. I had to work on a design that wasn’t originally made for 3D printing. I tried to improve it where I could, but it’s far from perfect.

If there are any issues with the design, please message me, and I’ll try to fix them.

I hope all of you enjoy it!

Tagi