DT700 / DT900 PRO X slider replacement Improved
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement slider for the DT700 / DT900 PRO X and more Beyerdynamic headsets. It has been improved with added rigidity.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
The slider on both sides of my Beyerdynamic DT900 PRO X broke a little while ago, so I decided to make a 3D scan of both. While I was doing this, I improved the design a bit to make it easier for a 3D printer to print and to make it generally stronger. I’ve been using my own replacement parts for a few weeks now, and I haven’t had any problems.
I advise using something stronger than PLA, as it lacks strength and degrades quickly. Consider using materials like PETG or other stronger alternatives. However, try to avoid materials that warp too much, like ABS. While ABS could be used, it would likely not fit very well.
I recommend printing it on its side, as shown in the picture above. Be prepared for a lot of support material it’s kind of difficult to remove. I had to work on a design that wasn’t originally made for 3D printing. I tried to improve it where I could, but it’s far from perfect.
If there are any issues with the design, please message me, and I’ll try to fix them.
I hope all of you enjoy it!
