608 Bearing Filament Guide for Dry Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reasonably simple and supportless filament guide for dry box, haven't found any 608 bearing based filament gudes so…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 171
- Wydruki
- 1
- Wyświetlenia
- 1158
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Reasonably simple and supportless filament guide for dry box, haven't found any 608 bearing based filament gudes so decided to design my own, decently quick print, and the frames is a mini stringing test as I found out, I am going to see if I can loosen the thread tolerance a tad on the frame as the bolts a very tight fit, pretty much requiring a 12mm spanner to fit
I printed the frame and bearing cover in TPU and bolt in PETG, but able to print all in PLA
Printed with 0.4mm nozzle on Ender 3 Pro, 15% Gyroid infill
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15
Filament: ESun PETG, TPU
Category: 3D Printer Accessories