Magnetic 4-Bit Holder - Bosch Professional GSB 12V
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic bit holder for Bosch GSB 12V. Easy to print and attach.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Bosch Professional 12V is a fantastic little tool.
But it gets even better when you don't have to search for the right screwdriver bit all the time!
That's why we designed this compact magnetic bit holder for the Bosch Professional GSB 12V.
It holds up to 4 bits right on the side of your drill, keeping them organized and always within reach. The holder follows the shape of the drill for a clean, low-profile fit.
What you'll need
2× neodymium magnets, Ø10 × 5 mm
Double-sided adhesive tape (e.g. 3M VHB)
A little bit of patience during printing
Printing instructions
Print the model in the orientation shown in the slicer preview.
Add a pause in your slicer just before the magnet cavities are closed by the next layers.
Insert both magnets (Ø10 × 5 mm) into their cavities.
Resume printing to permanently enclose the magnets inside the holder.
Installation
Clean the surface of your drill and the back of the printed holder. Apply strong double-sided adhesive tape and press the holder firmly into position.
That's it! Your favorite bits are now always right where you need them.
Happy printing!