1 / 5
Wire Splice Vise - holds two wires in line for soldering (100% printed) — zdjęcie 1
1 / 5

Wire Splice Vise - holds two wires in line for soldering (100% printed)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two sliding mini vises on a dovetail rail hold two wires perfectly in line, so both hands are free for soldering.

Ocena
0 / 5
Polubienia
33
Pobrania
64
Wydruki
0
Wyświetlenia
242
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Drop each wire into a vise from the top and turn the knob. Slide the vises together until the stripped ends overlap, lock them with the knob on top, and solder. Both vises sit on the same rail at the same height, so the wires always line up.

  • Holds wires from about 0.5 to 6 mm thick

  • V-grooves in both jaws centre the wire

  • Each vise slides on a dovetail rail and locks in place with a thumb screw

  • Strip-length scale on the front (0 in the middle, every 5 mm)

  • Four pegs to park heat-shrink tubing (3, 4.5, 6 and 8 mm)

  • Recesses for stick-on rubber feet (optional)

  • Printed nuts drop into slots in the vises, no metal hardware needed

Not tested yet - designed and checked in CAD (all threads and parts checked for fit and clearance).

Tagi