1 / 5
Wire Splice Vise - holds two wires in line for soldering (100% printed) — image 1
1 / 5

Wire Splice Vise - holds two wires in line for soldering (100% printed)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two sliding mini vises on a dovetail rail hold two wires perfectly in line, so both hands are free for soldering.

Rating
0 / 5
Likes
56
Downloads
127
Makes
0
Views
502
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Drop each wire into a vise from the top and turn the knob. Slide the vises together until the stripped ends overlap, lock them with the knob on top, and solder. Both vises sit on the same rail at the same height, so the wires always line up.

  • Holds wires from about 0.5 to 6 mm thick

  • V-grooves in both jaws centre the wire

  • Each vise slides on a dovetail rail and locks in place with a thumb screw

  • Strip-length scale on the front (0 in the middle, every 5 mm)

  • Four pegs to park heat-shrink tubing (3, 4.5, 6 and 8 mm)

  • Recesses for stick-on rubber feet (optional)

  • Printed nuts drop into slots in the vises, no metal hardware needed

Not tested yet - designed and checked in CAD (all threads and parts checked for fit and clearance).

Tags