HAPP 8-Way Microswitch Joystick to 4-Way Conversion Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Change your 8-Way HAPP Joystick to a (short-throw) 4-Way. Requires a Restrictor, 4 Microswitch Tabs, and an Actuator.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Change your 8-Way HAPP Joystick to a (short-throw) 4-Way. This works on 'early' Competition, Batt Top, and Ball Top joysticks that have the Lever Tab Slots.
Requires a Restrictor, 4 Microswitch Tabs, and an Actuator. With the Joystick upside down, and the Shaft removed:
Place Restrictor face down
Carefully, Snap in the 4 MicroSwitch Tabs
Reinstall Shaft
Attach Actuator, Secure with e-clip
If a Tab is broken during installation: remove as much of the tab as possible, then use a flat head screwdriver to push the remaining material through the joystick base.
Long Joystick spacer included, as they sometimes get lost.