HAPP 8-Way Microswitch Joystick to 4-Way Conversion Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Change your 8-Way HAPP Joystick to a (short-throw) 4-Way. Requires a Restrictor, 4 Microswitch Tabs, and an Actuator.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Change your 8-Way HAPP Joystick to a (short-throw) 4-Way. This works on 'early' Competition, Batt Top, and Ball Top joysticks that have the Lever Tab Slots.
Requires a Restrictor, 4 Microswitch Tabs, and an Actuator. With the Joystick upside down, and the Shaft removed:
Place Restrictor face down
Carefully, Snap in the 4 MicroSwitch Tabs
Reinstall Shaft
Attach Actuator, Secure with e-clip
If a Tab is broken during installation: remove as much of the tab as possible, then use a flat head screwdriver to push the remaining material through the joystick base.
Long Joystick spacer included, as they sometimes get lost.