Modular Spice Jar Insert for IKEA Faktum Drawer (47 mm square jars) / Gewürzglas-Einsatz
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular dovetail insert for 6 square 47 mm spice jars per row, any number of rows. Fits IKEA Faktum. No supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modular insert for an older IKEA Faktum drawer (floor width approx. 277 mm, rounded edge to the side wall approx. 11 x 12.5 mm). Each row holds 6 square spice jars (47 x 47 mm), e.g. these 120 ml jars: https://www.amazon.de/dp/B0GVKGHV68
No floor: jars stand directly on the drawer bottom
Side arms follow the rounded drawer edge and rest on it
Modular: pieces slide together via dovetails from the top, any number of rows
22 mm gap at the front, 11 mm between rows, 11 mm at the back
Every part fits diagonally on a 256 x 256 mm bed
PARTS for n rows, order front to back:
1x 1_vorne_front-spacer (loose, against the drawer front)
1x 2_anfang_start
(n-1)x 3_abstand_row-spacer
(n-1)x 4_mitte_middle
1x 5_ende_end
Total depth: 80.5 mm + (n-1) x 58.5 mm (3 rows approx. 198 mm, 6 rows approx. 373 mm)
PRINT THESE FIRST:
test_dummy_fit-test: low 8 mm frame for one row, checks width and jar fit in your drawer
test_probe_dovetail-test: print 2x, checks the dovetail fit (0.1 mm clearance)
PRINT SETTINGS:
0.4 mm nozzle, 0.2 mm layers, PLA or PETG, 3 walls, 15-20% infill
No supports. Print upside down (STLs are already oriented)
Elephant foot compensation 0.1-0.15 mm (important for the dovetails)
Place long parts diagonally on the bed
CUSTOMIZE: gewuerz_modular.py is a parametric Blender Python script (jar size, drawer width, rounded edge, gaps, dovetail clearance). Open it in Blender > Scripting and run it to re-export the STLs.
DEUTSCH: Bodenloser, steckbarer Einsatz für eine IKEA Faktum Schublade. 6 eckige Gläser (47 x 47 mm) pro Reihe, beliebig viele Reihen. Kopfüber ohne Supports drucken. Zuerst Dummy und 2x Probestück testen.
