1 / 6
Modular Spice Jar Insert for IKEA Faktum Drawer (47 mm square jars) / Gewürzglas-Einsatz — image 1
1 / 6

Modular Spice Jar Insert for IKEA Faktum Drawer (47 mm square jars) / Gewürzglas-Einsatz

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modular dovetail insert for 6 square 47 mm spice jars per row, any number of rows. Fits IKEA Faktum. No supports.

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
11
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

Modular insert for an older IKEA Faktum drawer (floor width approx. 277 mm, rounded edge to the side wall approx. 11 x 12.5 mm). Each row holds 6 square spice jars (47 x 47 mm), e.g. these 120 ml jars: https://www.amazon.de/dp/B0GVKGHV68

  • No floor: jars stand directly on the drawer bottom

  • Side arms follow the rounded drawer edge and rest on it

  • Modular: pieces slide together via dovetails from the top, any number of rows

  • 22 mm gap at the front, 11 mm between rows, 11 mm at the back

  • Every part fits diagonally on a 256 x 256 mm bed

PARTS for n rows, order front to back:

  • 1x 1_vorne_front-spacer (loose, against the drawer front)

  • 1x 2_anfang_start

  • (n-1)x 3_abstand_row-spacer

  • (n-1)x 4_mitte_middle

  • 1x 5_ende_end

Total depth: 80.5 mm + (n-1) x 58.5 mm (3 rows approx. 198 mm, 6 rows approx. 373 mm)

PRINT THESE FIRST:

  • test_dummy_fit-test: low 8 mm frame for one row, checks width and jar fit in your drawer

  • test_probe_dovetail-test: print 2x, checks the dovetail fit (0.1 mm clearance)

PRINT SETTINGS:

  • 0.4 mm nozzle, 0.2 mm layers, PLA or PETG, 3 walls, 15-20% infill

  • No supports. Print upside down (STLs are already oriented)

  • Elephant foot compensation 0.1-0.15 mm (important for the dovetails)

  • Place long parts diagonally on the bed

CUSTOMIZE: gewuerz_modular.py is a parametric Blender Python script (jar size, drawer width, rounded edge, gaps, dovetail clearance). Open it in Blender > Scripting and run it to re-export the STLs.

DEUTSCH: Bodenloser, steckbarer Einsatz für eine IKEA Faktum Schublade. 6 eckige Gläser (47 x 47 mm) pro Reihe, beliebig viele Reihen. Kopfüber ohne Supports drucken. Zuerst Dummy und 2x Probestück testen.

Tags