C1 INDX Extended Purge Bucket with magnet pockets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Core One Purge bucket with pockets for magnets up to 60x10x3 still in vase mode.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1.1
Did a bit of vase mode magic to add magnet pockets to the printer facing side of the Prusa supplied INDX extended purge bucket.
Was designed for 60x10x3 magnets and with them you don't really need the feet. They're strong enough to hold it in place at whatever height you want. However, you can use smaller magnets or stack multiple if you want but I would suggest 3mm thickness so there's enough friction that they don't drop out when you empty the bin.
I used the Prusa 3MF file and just replaced the STL inside it so just use whatever settings they recommend for the original.
PS: No step file. It was hacked up in Tinkercad. But if you have special request for a different pocket size to keep your magnets in place, let me know and I might be able to add a version for you.