Modular D&D Floor Scenery and Terrain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These interlocking tiles are designed to simulate complex terrain and structures for TTRPGs. They interlock to form…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These interlocking tiles are designed to simulate complex terrain and structures for TTRPGs. They interlock to form grids that are large enough to accommodate a standard 28mm miniature with wiggle room. These are primarily designed for FDM printing, but they can be resin printed if they are printed perfectly vertical to minimize warping during printing. The scaffolding can be printed and set up with tiles on top of it to allow for multi-level terrain. These measuring rod base, extension, and the the one called “measurer” can be assembled to mark the height of the ceiling in enclosed spaces. Each section plus the base represents one story, thus for a room with a ceiling height of 4 stories you would need the base, three extensions, and the measurer. More pictures will continue to be added as more are finished. I would also like to add textures at some point. I also made two versions of every model that is orientation dependent (like stairs) the different versions are exactly the the same, but the tabs are in opposite spots. Other editions will include ones that don’t have the interlocking mechanisms so that you can more quickly rearrange them on the fly. Also, credits to MZ4250 for the awesome figurines used in the pictures.
Category: Games