Radio Mundial – Internet Radio Case with Touch World Map (ESP32-S3 / Freenove FNK0104)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for a free ESP32-S3 internet radio with a touch world map: 3,700 stations. Two parts, PETG, no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tap a region, a country, a station… and it plays.
Radio Mundial is a free, open-source internet radio with a touch world map. It runs on the Freenove FNK0104 (ESP32-S3 with a 2.8" capacitive touch screen and built-in audio) and plays about 3,700 tested stations from 207 countries. No servers, no accounts, no subscription. This is its case: a small desktop radio that uses the speaker that comes with the board.
🎬 Build video: https://youtu.be/h7qwVlGDZos
🖨 PRINTING
• PETG (PLA also works), 0.24 mm layers, 0.4 mm nozzle, 4 walls, 15 % infill
• No supports: the parts are already in print orientation
• Both parts on one plate: about 1 h 48 min and 52 g on a Bambu Lab P2S (the 3MF project is included)
• Size: front 130 × 69 × 17 mm + 4 mm back cover
🔩 WHAT YOU NEED
• Freenove FNK0104 board – choose the «2.8 Inch IPS Touch» version (the radio does not work on the non-touch one). Amazon US: https://link.amazon/A0fZ7EvDX · Amazon Spain / Europe: https://link.amazon/B0c9qnA3x
• 4 × M3 × 5 mm screws for the board – not longer: the posts are 4 mm deep (M3 × 4 also works)
• 4 × M3 × 8 mm screws for the back cover
• The small speaker that comes with the board (its cable is short: lengthen it with two wires and heat-shrink, or use a speaker with a longer lead)
• Optional: a few dots of hot glue to hold the speaker behind the grille
🛠 ASSEMBLY
Put the board into the front with the USB-C port lined up with the USB-C opening. With the radio on its feet, the screen must be the right way up.
2. Screw the board in with the 4 × M3 × 5 mm screws.
3. Plug the speaker into the connector marked SPEAKER (not BAT) and glue it behind the grille.
4. Close it with the back cover and the 4 × M3 × 8 mm screws.
Step-by-step manual with photos: https://adriancubasalvarez.github.io/radio-mundial/manual/
💻 INSTALL THE RADIO (no software needed)
Connect the board with a USB-C data cable, open this page in Chrome or Edge and click Install (about 2 minutes): https://adriancubasalvarez.github.io/radio-mundial/install/
Then connect it to your 2.4 GHz Wi-Fi from the same page or from your phone (QR on the screen). After that, no computer needed: just a USB-C charger.
✨ FEATURES
Favorites, recent stations, search by name or by 13 genres, local time of each station, song title, sleep screen with clock, weather and air quality, RGB LED that pulses with the music, up to 5 alarms with snooze, LED sunrise and sleep timer, station list updates from the radio itself. English and Spanish.
📂 SOURCE
Firmware, web installer, manual and editable STEP files: https://github.com/adriancubasalvarez/radio-mundial
Also on MakerWorld: https://makerworld.com/en/models/3568249
As an Amazon Associate I earn from qualifying purchases.
🇪🇸 EN ESPAÑOL: carcasa para la radio por Internet Radio Mundial (placa Freenove FNK0104, versión táctil «2.8 Inch IPS Touch»). PETG, capa de 0,24 mm, 4 perímetros, sin soportes; las dos piezas en una bandeja, unas 1 h 48 min y 52 g. Tornillos: 4 × M3 × 5 mm para la placa (no más largos) y 4 × M3 × 8 mm para la tapa. El altavoz va en el conector SPEAKER. Instalación desde el navegador: https://adriancubasalvarez.github.io/radio-mundial/install/ · Manual en español: https://adriancubasalvarez.github.io/radio-mundial/manual/es/
En calidad de Afiliado de Amazon, obtengo ingresos por las compras adscritas que cumplen los requisitos aplicables.