1 / 3
Long Hose Retainer for 50 mm Waist Belt — zdjęcie 1
1 / 3

Long Hose Retainer for 50 mm Waist Belt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bar for the 50 mm waist belt that keeps the long hose tucked in at the hip. No bungee, no tools, prints flat.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple bar that keeps the long hose tidy at the hip, no bungee needed. Thread the 50 mm waist belt through the slot: the bar sits across the belt and hangs down along the hip. Tuck the long hose under it. If you dive a long hose, you know where it goes ;)

  • 180 × 15 × 15 mm bar, all edges rounded (R2.5)

  • Slot 51 × 4.08 mm for 50 mm webbing, 15 mm from one end, slot edges rounded (R0.8)

  • 5.46 mm walls on both sides of the slot (13 × 0.42 mm lines)

  • No bungee, no tools, single color, PETG

  • Prints flat; the slot is a vertical window, so there is no bridge

Files: 3MF (Bambu Studio project, P2S 0.16 profile), STL.

Print settings: Bambu Lab P2S, 0.4 mm nozzle, 0.16 mm High Quality, PETG, 2 walls, 15% gyroid.

Note: the photos show my personal print, with my name in a second color on one side. The files are clean, no lettering.

Tagi