1 / 3
Long Hose Retainer for 50 mm Waist Belt — image 1
1 / 3

Long Hose Retainer for 50 mm Waist Belt

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bar for the 50 mm waist belt that keeps the long hose tucked in at the hip. No bungee, no tools, prints flat.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
3
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A simple bar that keeps the long hose tidy at the hip, no bungee needed. Thread the 50 mm waist belt through the slot: the bar sits across the belt and hangs down along the hip. Tuck the long hose under it. If you dive a long hose, you know where it goes ;)

  • 180 × 15 × 15 mm bar, all edges rounded (R2.5)

  • Slot 51 × 4.08 mm for 50 mm webbing, 15 mm from one end, slot edges rounded (R0.8)

  • 5.46 mm walls on both sides of the slot (13 × 0.42 mm lines)

  • No bungee, no tools, single color, PETG

  • Prints flat; the slot is a vertical window, so there is no bridge

Files: 3MF (Bambu Studio project, P2S 0.16 profile), STL.

Print settings: Bambu Lab P2S, 0.4 mm nozzle, 0.16 mm High Quality, PETG, 2 walls, 15% gyroid.

Note: the photos show my personal print, with my name in a second color on one side. The files are clean, no lettering.

Tags