1 / 3
Earth Quake End Caps - RepRack Hanger for IKEA HUGAD 28mm — zdjęcie 1
1 / 3

Earth Quake End Caps - RepRack Hanger for IKEA HUGAD 28mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

End caps to protect the ends of the bar, and keeps it from sliding off in Earth Quake.

Ocena
0 / 5
Polubienia
3
Pobrania
1
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

Earth Quake End Caps - RepRack Hanger for IKEA HUGAD 28mm

I designed these end caps for a nice clean fit, and to keep the brackets and bars from separating in an Earth Quake. The screw draws the two halves together and they wedge in place against the tubing inner wall.

To make one small or large end cap please use one 3mm melt-in insert and one 3mmx25mm screw per assembly.

I printed these in 3d Fuel Tough Pro PLA+.

https://www.3dfuel.com/products/pro-pla-filament-lulzbot-green-1-75mm?variant=39755406770241

Print Bed Temp - 60 deg C

Nozzle Temp - 245 deg C

6 bottom layers

3 vertical layers

6 top layers

25% gyroid infill.

Parts used:

Qnty-1 

3mm Stainless Steel melt-in insert.

https://www.mcmaster.com/94459A724/

Qnty-1 

3mmx25mm Stainless Button Head Screw.

https://www.mcmaster.com/90910A575/

Tagi